Nussbaum SMART LIFT 2.30 SL Manual Del Usuario página 96

Made
in
Germany
3 Technical information
3.1 Technical data
Total weight
SMART LIFT 2.30 SL
SMART LIFT 2.35 SL
SMART LIFT 2.40 SL
Load carrying capacity
SMART LIFT 2.30 SL
SMART LIFT 2.35 SL
SMART LIFT 2.40 SL
Loading a lifting arm
Load distribution
SMART LIFT 2.30 SL
SMART LIFT 2.35 SL
SMART LIFT 2.40 SL
Lift time
Lowering time
Standard operating volt-
age
Motor capacity
Motor speed
Noise level LpA
On-site connection
Optional energy set
96
600 kg
650 kg
650 kg
3000 kg
3500 kg
4000 kg
A single load from only one
lifting arm may not happen
max. 2:3 or 3:2 or against
the drive-in direction
max. 3:1 or 1:3 or against
the drive-in direction
approx. 40 s (3 t)
approx. 46 s (3,5 t)
approx. 48 s (4 t)
approx. 40 s
3~/N+PE,400 V, 50 Hz
2 x 1,5 kW
1420 rpm
≤ 70 dB
3~/N+PE, 400 V, 50 Hz
With fuse 16 Amp slow
blow
According to VDE regulation
Pneumatic connection> for
compressed air 6-10 bars
Socket: 220 V/50 Hz
i Important information!
The lift is transferred without electrical connection
ready to the provided power supply, after a check of
function and safety. A plug connection must be pro-
vided on-site. This on-site located connection plug must
be located in the immediate vicinity of the lift and may
only be set at a height that can be reached without
any assistance (e.g. ladders). Otherwise a separate,
lockable main switch must be located in the immediate
vicinity of the lift that can be reached without assis-
tance.
3.2 Safety devices
• Safety mechanism for lift nut break
Check the lift nut with the integrated wear display.
• End switch by the electronic controls
Secure the lift against further extension of the lift rail
upwards or downwards.
• Electronic synchronisation monitoring
Secure against asynchronous running of the lift rails to
each other
• Lifting arm block
Secures the lifting arm against horizontal movement in
a lifted condition
• Capture hook
Secure against re-lifting after a lift nut break
• Reversing switch with curtain lock device
Fuse to prevent unauthorized use
• CE-STOP + acoustic warning signal
Secure against shear and crushing points in the foot
area
OPI_SMART LIFT 2.30 SL-2.35 SL-2.40 SL_V4.4_DE-EN-FR-ES-IT