Publicidad
Idiomas disponibles
Idiomas disponibles
B
UN41-0886UA
Proceed as outlined below.
1) Use the specific tool (A) provided with the work vehi-
cle for lifting.
2) Strap up the work vehicle as shown in the figure.
Safety advice for the adjustments
Adjustment work must be carried out with the work
vehicle on flat, compact ground, with the machine
resting on the ground (except where expressly stat-
ed otherwise in the manual).
Adjusting the spacing between the packing wheels and the ploughshare
The packing wheels (C) are used to ridge and compact
the soil around the planted seedlings.
English language
HANDLING AND ASSEMBLY INFORMATION
A
C
3) Check that the pin (B) is locked with the safety pin
ADJUSTMENT INFORMATION
The tractor engine must be switched off, the parking
brake engaged, and the ignition key removed, and
all the necessary safety measures required to work
safely must be taken.
The distance between the packing wheels and the
ploughshare must be adjusted according to the type of
ground.
11
D
(C) and that the chains (D) are secured firmly to the
frame.
4
D
5
Use and maintenance
Publicidad
