EN
Display and control panel at
1. The first time the appliance is switched
on, it will always operate with the
settings: 5°C for the refrigerator, 0°C for
MyZone and 0°C for MyZone.
-18°C for the freezer. If you wish to adjust
the temperature or functions more
frequently, press the button to perform the
operations. Temperature range for
"My Zone" is from -3ºC to 3ºC.
2. Refrigerator temperature setting - press
the button on the left side of the control
panel to reach different temperatures
from 2ºC to 8ºC.
3. Freezer temperature setting press the
button
on the right side of the
control panel to reach different
temperatures from -15°C to -25°C.
4. My Zone drawer setting function: This
button controls the temperature. By
pressing this button
from -3° to +3°. This function can be
activated/deactivated by pressing
continuously for three seconds (shows
OFF).
5. Rapid cooling function - Press the
button
, the light on the button
illuminates and the rapid cooling function
is switched on, the refrigerator starts to
operate.
automatically at the set temperature 2°C
and switches off after 24 hours, the
symbol light goes out.
6. Holiday function - Press the button
the light in the button illuminates, the
holiday function is switched on and the
whole appliance starts to operate
automatically with the settings: refrigerator
at 17°C and freezer at -18°C.
101 - INOXPAN S.L.
, the figure will go
7. Eco function - Press the button
the control panel, the eco function is
switched on and the button is illuminated,
the refrigerator compartment operates at a
setting of 5°C and the freezer
compartment operates at a setting of -18°
C. The adaptation zone operates at a
setting of 3°C.
8. Quick freeze function - Press the button
the button light illuminates and the freezer
starts to operate with the quick freeze
function, temperature setting -25°C. After
24 hours, the fast freeze function switches
off automatically.
9. Press the button for 3 seconds to switch
off the appliance and the button lights up,
the power is cut off. The internal lamps go
out, the compressor stops. To switch on.
Press the button
switch on your device, the symbol
lights up and the power is switched
on again.
10. On non-frost models, there is a function:
the binge defrost. Press the buttons
for 5 seconds to activate the binge
+
defrost function to clean the freezer
evaporator and the freezer temperature
digits will flash. Press the button
seconds to switch off the binge de- icing
function, and the freezer temperature
digits are removed.
on
for 3 seconds to
+