Publicidad
Idiomas disponibles
Idiomas disponibles
Indication of faults
This appliance has a "fault display and alarm" function. Once the sensors have a fault, alarms are
shown on the temperature display, the appliance continues to cool but a professional service
technician must be called to check the appliance.
F2 - Adaptive Zone Sensor
F3 - Refrigerator flat sensor
F4 - Freezer compartment sensor F5 -
Defrost sensor F5 - Defrost sensor
2E - Freezer fan/motor failure
CE- Communication failure between main panel and display panel.
The above Errors are only displayed on the screen, without voice.
Freezer over-temperature alarm: after the freezer temperature reaches the set temperature, if the
temperature rises to >-1 °C, the alarm will be activated, accompanied by the freezer temperature
digit flashing. Press any button to cancel the voice alarm. The flashing will remain until the
temperature is >-1 °C.
PS: The main plate is located in the compressor compartment.
5ºC/ -18ºC
5ºC/ -18ºC
5ºC/ -18ºC
Super freeze" function
Super cooling" function
Function
Summer or ambient temperature between 25-35ºC
Spring, autumn or ambient temperature between 15-25ºC.
Winter or ambient temperature between 5-15ºC
Fast freezing
Super cold
Conditions
INOXPAN S.L. - 102
EN
Publicidad
