SICE FIT LINE 32 Manual De Instrucciones página 120

- Hold the tyre with your hands and lift it until there is a
slight gap between the lower bead and bottom edge of
the rim in order to close the upper bead and the top of
the rim (fig. 41).
- Release the wheel from the sliding
clamps on the table top (Fig. 43).
120
-Inflate the tyre by operating the proper pedal (Fig.42)
at short intervals; check the pressure gauge frequently
to make sure that the pressure NEVER exceeds the
maximum pressure specified by the tyre manufacturer.
42
-Inflate the tyre by operating the proper pedal in
inflation position (average) (Fig. 44) at short intervals;
check the pressure gauge frequently to make sure that
the pressure NEVER exceeds the maximum pressure
specified by the tyre manufacturer.
44
User Manual
SI
FITLINE 32 - 32 2V - 32 GP - 32 GP 2V
41
NO
43