SICE FIT LINE 32 Manual De Instrucciones página 121

- Tilt back the column (Fig.45),
wheel from the tire changer.
To improve the operation of the tubeless tyre inflation system the compressed air
line pressure must be between 8/10 bar.
Explosion hazard. Do not exceed the manufacturer's maximum pressure as stated
on the sidewall of the tire when seating beads..
If tires being mounted require more than the tire manufacturer's maximum bead
seating pressure and , the wheel should be removed from the tire changer, placed
in an inflation cage, and inflated per manufacturer's instructions.
Activate air inflation jets only when sealing the bead. Do not point jets towards people.
User Manual FITLINE 32 - 32 2V - 32 GP - 32 GP 2V
release and remove the
NOTICE
NOTICE
WARNING
WARNING
45
UK
121