Unpacking; Unpacking/Assembly - SICE FIT LINE 32 Manual De Instrucciones

Handling
To move the packing, insert the tines of a fork-lift
truck into the slots on the base of the packing itself
(pallet) (Fig.3).
Before moving the machine, refer to the HOISTING/
HANDLING section.
Keep the original packing in good conditions to be used if the equipment has to be
shipped in the future.

2.1 UNPACKING

Remove the upper part of the packing and make sure the machine has not been damged
during transportation.

3. UNPACKING/ASSEMBLY

Take the utmost care when unpacking, assembling, hoisting and installing the ma-
chine as described below.
Failure to observe these instructions can damage the machine and compromise the
operator's safety.
Before removing the machine fronm the pallet,make sure that the same have been
removed the items shown have below.
- Remove the upper part of the packing and make sure that the machine has not suffered
damage in transit; identify the points at which the machine is anchored to the pallet.
- The machine comprises the following main units (fig.4):
User Manual FITLINE 32 - 32 2V - 32 GP - 32 GP 2V
NOTICE
WARNING
3
UK
93