Inflating Tyres - SICE FIT LINE 32 Manual De Instrucciones

9.7.b. INFLATING TYRES
- Release the wheel from the sliding
clamps on the table top (Fig. 32).
33
- Remove the valve core if it had not already been removed.
Connect the fitting Doyfe inflation hose to the valve stem
(Fig. 34).
User Manual FITLINE 32 - 32 2V - 32 GP - 32 GP 2V
33a
-Inflate the tyre by operating the proper pedal (Fig.35)
at short intervals; check the pressure gauge frequently
to make sure that the pressure NEVER exceeds the
maximum pressure specified by the tyre manufacturer.
35
SI
-Bring the horizontal arm to the fully
extended position(Fig. 33).
-Lower the vertical rod until it
touches the rim and press the but-
ton (Fig. 33a).
NO
32
34
117
UK