Important; Work Environment Conditions - SICE FIT LINE 32 Manual De Instrucciones

IMPORTANT: for the correct and safe operation of the machine, the lighting level in
the place of use should be at least 300 lux.
Do not install the machine outdoors. It is designed for use in an indoor, sheltered area.
Install the tyre changer in the chosen work position, complying with the minimum clear-
ances shown in Fig.7.
The surface must have a load-carrying capacity of at least 1000 kg/m
- Relative humidity 30% - 95% without condensation.
- Temperature 0°C - 50°C.
Each time the machine remains disconnected from the pneumatic line for long periods,
check the direct operation of the controls with the relative arm, following the pressure
restoration procedure. Carry out the first control operation very slowly.
98
CAUTION
7- 32 - 32GP

Work environment conditions

WARNING
User Manual
.
2
FITLINE 32 - 32 2V - 32 GP - 32 GP 2V