Descargar Imprimir esta página

Panasonic GP-UH532C Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 139
Precautions
Refer installation work to the dealer.
Installation work requires technique and experiences. Failure
to observe this may cause fire, electric shock, injury, or
damage to the product.
Be sure to consult the dealer.
Wire properly.
Short circuit or wrong wiring may cause fire or electric
shock.
Select an installation area that can support the total
weight.
Selecting an inappropriate installation surface may cause
the product to fall down or topple over, resulting in injury.
Installation work shall be started after sufficient reinforce-
ment.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause a fall of the
product resulting in injury or accidents.
Consult the dealer for the inspections.
Turn the power off when cleaning this product.
Failure to observe this may cause an electric shock.
Stop the operation immediately when something is
wrong with this product.
When smoke goes up from the product, the smell of smoke
comes from the product, or deterioration of the exterior of
this product is noticed, continued use will result in fire,
injury, or damage to the product.
Turn off the power of this product immediately, and then
contact your dealer.
Do not engage in work related to the installation and
wiring during the power is on.
Failure to observe this may cause fire or electric shock.
Do not use this product in an inflammable atmo-
sphere.
Failure to observe this may cause an explosion resulting in
injury.
Avoid installing this product in the locations where
salt damage occurs or corrosive gas is produced.
Failure to observe this may cause deterioration of the
mounting portions, and accidents such as a fall of this prod-
uct may occur.
Do not strike or give a strong shock to this product.
Failure to observe this may cause fire or injury.
Do not insert any foreign objects.
Do not allow any foreign object or liquid such as water, a
metallic part, etc. to enter since it may cause fire or electric
shock.
If it happens, disconnect the power plug from the electric
outlet immediately and contact your dealer.
Do not disassemble nor alter this product.
Failure to observe this may cause fire or electric shock.
Ask your dealer for inspection and repair.
Under the lightning (or during construction work), do
not touch this product, power cord, or connected
cables.
Failure to observe this may cause an electric shock.
Avoid placing receptacles that contain liquids such as
water near this product.
If liquid spills onto this product, it may cause fire or an elec-
tric shock.
If it happens, disconnect the power plug from the electric
outlet immediately and contact your dealer.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
[Precautions for use]
To keep on using with stable performance
Parts of this product may deteriorate and it may shorten the
lifetime of this product when using in locations subject to
high temperatures and high humidity.
Use this product at temperatures between 0 °C to 40 °C
{32 °F to 104 °F}. Failure to observe this may adversely
affect the components inside or cause this product to mal-
function. Use of this product at temperatures of 30 °C
{86  °F} or lower is recommended without direct heat from
heaters in consideration of heat release at the product loca-
tion.
Handle this product with care.
Do not drop this product, nor apply shock or vibration to
the product. Failure to observe this may cause trouble.
Do not aim this product at strong light sources.
A light source such as a spot light may cause a blooming
(light bleeding).
Bright subject
Blooming
13

Publicidad

loading