Panasonic GP-UH532C Manual De Instrucciones página 40

#0 Set the method of saving to/loading from USB memory
[SAVE/LOAD MODE (USB)]
The following is available as the operation mode when a USB memory is inserted:
AUTO : A prompt message to ask the operation (read/load/no action) will be automatically displayed.
MANUAL : No action is made when a USB memory is inserted. Operate in the [USER PROFILE SAVE/LOAD] page.
FLIP AND MIRROR OFF
F+M STATUS DISPLAY OFF
COLOR BAR * ON
FOOTSW CONTROL CH1 PROFILE1 ←→ 2
FOOTSW CONTROL CH2 FREEZE
USER PROFILE SAVE/LOAD * USB → CAMERA
SAVE/LOAD MODE ( USB ) AUTO
DIGITAL ZOOM ON
DIGITAL ZOOM STATUS DISPLAY OFF
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
#1 Set the zoom on and off [DIGITAL ZOOM]
Set the zoom function ON/OFF.
The zoom factor can be set between 1x to 2.5x in steps of 0.1x. To switch the setting, press [e] or [f] button.
#2 Set the zoom ratio display [DIGITAL ZOOM STATUS DISPLAY]
Set whether to display the current zoom ratio on the screen (default: OFF).
Note:
• When 1x is selected, the ratio will not be displayed on the screen.
Set up SYSTEM
#3 Set the angle of view for Full HD output [DISPLAY RANGE (FHD)]
The angle of view for Full HD output is selectable from the following:
FULL : Down-converts the angle of view set for Ultra HD output to be suited for Full HD output.
CENTER : Cuts out the center of the Ultra HD output angle of view for Full HD output.
UPPER LEFT : Cuts out the upper left of the Ultra HD output angle of view for Full HD output.
UPPER RIGHT : Cuts out the upper right of the Ultra HD output angle of view for Full HD output.
LOWER LEFT : Cuts out the lower left of the Ultra HD output angle of view for Full HD output.
LOWER RIGHT : Cuts out the lower right of the Ultra HD output angle of view for Full HD output.
DISPLAY RANGE(FHD) FULL
OSD POSITION UPPER LEFT
HDMI1 COLOR DEPTH YPbPr
HDMI2 COLOR DEPTH YPbPr
G/L SYNC TERMINAL SETTING OUT
G / L SYNC STATUS INFO INTERNAL
D MODE OFF
3
* TIME ADJUSTMENT
* USER PROFILE RESET
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
#4 Set the OSD position of the video output [OSD POSITION]
Select a OSD position of the video output from the following:
UPPER LEFT : Displays OSD in the upper left area of the video output angle of view.
UPPER RIGHT : Displays OSD in the upper right area of the video output angle of view.
LOWER LEFT : Displays OSD in the lower left area of the video output angle of view.
LOWER RIGHT : Displays OSD in the lower right area of the video output angle of view.
40
Note:
• The content of all the items in the QUICK MENU, "EXPOSURE", "PICTURE",
ALL "CONTRAST", and "PROFILE" in the ADVANCED MENU will be saved or loaded.
( )
(Except "HEAD GAIN" of the "EXPOSURE")
]
Note:
• This function is effective for the video output of [HDMI 2] and [3G/HD SDI 2].
( 420 ) 8 BIT
( 422 )
]