Panasonic GP-UH532C Manual De Instrucciones página 38

Step 2
Move the cursor to the target character using the [g], [h],
[e] or [f] button, and press the [SEL] button.
→ The entered characters will be displayed in the editing
area.
<Character entry>
• To revise a character, move the cursor to "←" or "→"
and press the [SEL] button. Move the cursor to the
character to be revised in the entry range and re-enter a
correct character.
• To enter a blank, move the cursor to "SPACE" and
press the [SEL] button.
• To delete all the entered characters, move the cursor to
"RESET" and press the [SEL] button.
@4 Set the additional setting for each fluorescent image capture mode
[FLUORESCENCE MODE]
Set the additional setting for each fluorescent image capture mode.
The additional setting can be selectable from the following:
OFF (default) : Does not perform the additional setting for fluorescent image capturing.
MODE1 : Performs the additional setting for FLUORESCENCE1.
MODE2 : Performs the additional setting for FLUORESCENCE2.
MODE3 : Performs the additional setting for FLUORESCENCE3.
PF LABEL: •••••••••••••••• ID: PANA_DEFAULT
1
USER PROFILE
USER PROFILE ID * OFF
USER PROFILE LABEL * OFF
FLUORESCENCE MODE OFF
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
Important:
• The setting for fluorescent imaging is preset in PROFILE 5 and 6.
• When using the fluorescent image capture mode, peripheral devices such as a light source or filter, etc. are required.
• If considering using them, contact your dealer.
Note:
• When "MODE1" is selected, set "MONOCHROME MODE" either "ON" (black and white mode: default) or "OFF" (color
mode).
• When other than "OFF" is set, "GAIN" can be set up to 18 dB. (Up to 12 dB when "OFF" is set.)
Set up FUNC
@5 Set the vertical and horizontal flip function [FLIP AND MIRROR]
The following is available as the vertical and horizontal flip function:
OFF (default) : Normal display
FLIP : Vertically flipped
MIRROR : Horizontally flipped
FLIP+MIRROR : Vertically and horizontally flipped. To switch the setting, press [g] or [h] button.
FLIP AND MIRROR OFF
F+M STATUS DISPLAY OFF
COLOR BAR * ON
FOOTSW CONTROL CH1 PROFILE1 ←→ 2
FOOTSW CONTROL CH2 FREEZE
USER PROFILE SAVE/LOAD * USB → CAMERA
SAVE/LOAD MODE ( USB ) AUTO
DIGITAL ZOOM ON
DIGITAL ZOOM STATUS DISPLAY OFF
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
38
MONOCHROME MODE
]
Note:
• The freeze function can be performed at the same time.
( ALL )
]
Step 3
After entering the title, move the cursor to "＊POSI" and
press the [SEL] button.
→ The display positioning screen will be displayed and the
entered camera title blinks.
Step 4
Use the [g], [h], [e] and [f] buttons to set the title posi-
tion, and press the [MENU] button.
→ The display position is determined and the title creation
screen will be restored.
** MODE
1 **
ON