Panasonic GP-UH532C Manual De Instrucciones página 37

@2 Set the correction level assigned to the [IE] button [IE FUNCTION LEVEL]
Adjust the correction level of the function selected with [IE FUNCTION SELECT] by operating the [e] or [f] button viewing a
vector scope or color video monitor.
When the value is incremented, the amount of correction increases, and when decremented, the amount of correction
decreases.
When "COLOR ENHANCEMENT" is selected, the color of RED, RED&YELLOW, or YELLOW can be selected in addition to the
correction level.
PF LABEL: •••••••••••••••• ID: PANA_DEFAULT
1
GAMMA SELECT S-CURVE
GAMMA VALUE 0.45 [ 0.35 0.55 ]
*
KNEE MODE MANUAL
KNEE POINT 8 [ 0 * 15 ]
KNEE SLOPE
3 [ 0 * 7 ]
IE FUNCTION SELECT WDR
LEVEL 80 [ 0 255 ]
*
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
Set up PROFILE
@3 Set the user profile ID and label [USER PROFILE ID] [USER PROFILE LABEL]
Set the user profile ID and label. The ID and the label that indicate the camera location or image content can be created and
displayed on the screen with use of alphanumeric characters and symbols. Up to 16 characters can be used for the ID and
label.
Follow the procedure below to set the ID and label.
PF LABEL: •••••••••••••••• ID: PANA_DEFAULT
1
USER PROFILE
USER PROFILE ID * OFF
USER PROFILE LABEL * OFF
FLUORESCENCE MODE OFF
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
Label creation screen
(When the frame frequency is 50 Hz)
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789_
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
← → SPACE
*POSI RET END RESET
................
Editing area
Step 1
Set "USER PROFILE ID" or "USER PROFILE LABEL" to "
＊ON" and press the [SEL] button.
→ The title creation screen will be displayed.
Important:
• When "＊OFF" is selected for "USER PROFILE ID" or
"USER PROFILE LABEL", "USER PROFILE" can be set
but not displayed.
]
Label creation screen
(When the frame frequency is 59.94 Hz)
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789_
().,'":;&#!?=
+-*/%$
← →
*POSI RET END RESET
................
]
Editing area
Display positioning screen
FLOOR 1
SPACE
Note:
• The "＊POSI" setting of "USER PROFILE ID" is available
only when "＊OFF" is selected for "USER PROFILE
LABEL". When "＊ON" is selected for "USER PROFILE
LABEL", a higher priority will be given to the "＊POSI"
setting of "USER PROFILE LABEL".
• As default, "FLUORESCENCE2" is set for "PROFILE 5";
"FLUORESCENCE1" is set for "PROFILE 6".
37