Panasonic GP-UH532C Manual De Instrucciones página 36

Set up CONTRAST
!6 Set the gamma correction mode [GAMMA SELECT]
The gamma mode can be selectable from the following:
S-CURVE (default) : By enhancing gamma, noise can be reduced while keeping the contrast.
NORMAL
PF 1 LABEL: •••••••••••••••• ID: PANA_DEFAULT
GAMMA SELECT S-CURVE
GAMMA VALUE 0.45 [ 0.35 0.55 ]
*
KNEE MODE MANUAL
KNEE POINT 8 [ 0 15 ]
*
KNEE SLOPE 3 [ 0 * 7 ]
IE FUNCTION SELECT WDR
LEVEL 80 [ 0 255 ]
*
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
!7 Set the gamma correction level [GAMMA VALUE]
View a waveform monitor or color video monitor to set the gamma correction level.
Set the gamma correction level between 0.35 and 0.55 (default: 0.45).
The gamma correction level will be set OFF (gamma = 1), if the [e] button is pressed when the gamma correction level is
"0.55".
!8 Set the knee mode [KNEE MODE]
Due to illumination or reflection of the subject, "blown out highlights" may occur in which the bright part of the image may
appear flattened. This phenomenon occurs when the luminance signal exceeds the dynamic range of the camera. To set the
high luminance input signals within the dynamic range of the camera, compress the gradation using the knee function.
Select the adjustment method from the following:
MANUAL (default) : Enables manual adjustment of knee point and knee slope.
AUTO
!9 Set up the knee point [KNEE POINT]
Be sure to view the waveform monitor or color video monitor while adjusting the knee point adjustment.
It sets the compression point for the high luminance input signals.
@0 Set the knee slope [KNEE SLOPE]
Be sure to view the waveform monitor or color video monitor while adjusting the knee slope.
Set the compression level for the high luminance input signals by adjusting the knee slope.
@1 Set the [IE] button [IE FUNCTION SELECT]
Select a function to be assigned to the [IE] (IMAGE ENHANCEMENT) button from the following:
WDR
DARK AREA CORRECTION
OVER EXPOSURE REDUCTION : The exposure correction function controls the over exposure.
SMOKE CORRECTION
COLOR ENHANCEMENT
PF LABEL: •••••••••••••••• ID: PANA_DEFAULT
1
GAMMA SELECT S-CURVE
GAMMA VALUE 0.45 [ 0.35 0.55 ]
*
KNEE MODE MANUAL
KNEE POINT 8 [ 0 15 ]
*
KNEE SLOPE 3 [ 0 * 7 ]
IE FUNCTION SELECT WDR
LEVEL 80 [ 0 255 ]
*
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
36
: A standard gamma characteristic
]
: Adjusts the knee point and knee slope automatically.
: The dynamic range expansion function corrects the dark area brighter while controlling
the over exposure.
: The adaptive black stretch function corrects the dark area brighter.
: The smoke correction function clears white blur.
: The color enhancement function enhances the selected color.
]