Panasonic GP-UH532C Manual De Instrucciones página 16

Camera control unit (CCU)
<Front>
!4
r Profile selection button [PROFILE]
Selects a profile from 1 to 6. Each profile should be set
up beforehand using the SETUP menu (☞ page 30).
t Profile selection lamp [1/2/3/4/5/6] (Green)
The selected profile number will be lit in green.
y Menu button [MENU]
When the button is pressed for more than 1 second,
the SETUP menu (ADVANCED MENU) will be displayed.
An upper layer of the MENU will be displayed when the
button is pressed while the SETUP menu is displayed.
The SETUP menu can be hidden by pressing the button
for more than 1 second.
Pressing this button except while the SETUP menu is
displayed, the screen freeze function will be activated.
u Up/Down/Right/Left buttons [g/h/e/f]
• Up button [g]/Down button [h]
Changes the target setting item while the SETUP menu
is displayed.
When it is pressed while other than the SETUP menu is
displayed, the setting of the "FLIP AND MIRROR" will
be switched. (☞ page 38)
• Right button [f]/Left button [e]
Moves the cursor, or changes the content of setting
item while the SETUP menu is displayed.
When it is pressed while other than the SETUP menu is
displayed, the zoom ratio of the "DIGITAL ZOOM" will
be switched. (☞ page 40)
i IE status lamp (Green)
Indicates the On/Off status of the IE (IMAGE ENHANCE-
MENT) function.
On: IE function is enabled.
Off: IE function is disabled.
o IE button [IE]
Switches On/Off of the IE function.
16
r t y
!5 !6 !7 !8
u i o !0 !1 !2 !3
!9 @0 @1
0 ! AWC status lamp (Orange)
Indicates the status of the AWC (Automatic White bal-
ance Control) function.
Off: AWC is deactivated.
Blink: AWC is activated or running.
Blink → Off: AWC success
On: AWC error
1 ! AWC button [AWC]
If "WHITE BAL MODE" in the SETUP menu is set to
"AWC", AWC will be started up when the button is
pressed while the camera images are being displayed.
Important:
• When the camera head is not connected, the [AWC]
button does not function.
2 ! AE status lamp (Green)
Indicates the Auto/Manual mode status of the AE (Auto-
matic Exposure) function.
On: Auto exposure
Off: Manual exposure
3 ! AE button [AE]
Switches the Auto/Manual mode of the AE function.
4 ! Power status lamp (Green)
Indicates the On/Off status of the power.
On: Power ON
Off: Power OFF
5 ! Power switch [Switch mark]
Turns the power of the CCU and camera head on and
off.
6 ! USB status lamp (Green)
Indicates the status of USB.
Blink: Data access
On: Mount
Off: Unmount
@2