Publicidad
Idiomas disponibles
Idiomas disponibles
@6 Set the display for vertical and horizontal flip status [F+M STATUS DISPLAY]
Select "ON" or "OFF" (default) to set whether to display "
the screen when the [g] or [h] button is pressed.
FLIP AND MIRROR
OFF
F+M STATUS DISPLAY
OFF
COLOR BAR
* ON
FOOTSW CONTROL CH1
PROFILE1 ←→ 2
FOOTSW CONTROL CH2
FREEZE
USER PROFILE SAVE/LOAD
* USB → CAMERA
(
ALL
)
SAVE/LOAD MODE
(
USB
)
AUTO
DIGITAL ZOOM
ON
DIGITAL ZOOM STATUS DISPLAY OFF
[
EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
@7 Display the color bar [COLOR BAR]
Display the color bar.
The top page will be restored when the [MENU] button is pressed.
Note:
• When the camera head is not connected with the CCU, the color bar will be displayed.
@8 Set the foot switches [FOOTSW CONTROL CH1/CH2]
The following functions can be assigned to CH1 or CH2:
NONE
: Disable the switch.
FREEZE
: Sets ON/OFF of screen freeze.
FLIP+MIRROR
: Sets ON/OFF of vertical and horizontal image flip.
FLIP
: Sets ON/OFF of vertical image flip.
MIRROR
: Sets ON/OFF of horizontal image flip.
PROFILE 1←→2
: Switches between profile 1 and 2.
PROFILE 1←→5
: Switches between profile 1 and 5.
PROFILE 1←→6
: Switches between profile 1 and 6.
PROFILE 3←→4
: Switches between profile 3 and 4.
PROFILE ALL
: Switches between all the profiles, from 1 to 6 in order.
ZOOM IN
: Zooms in the image when "ON(ENABLE)" is selected for "DIGITAL ZOOM".
ZOOM OUT
: Zooms out the image when "ON(ENABLE)" is selected for "DIGITAL ZOOM".
ZOOM 1.0x←→2.0x : Switches between 1.0x and 2.0x when "ON(ENABLE)" is selected for "DIGITAL ZOOM".
3D←→2D
: Switches between 3D and 2D of the output image when "SIDE-BY-SIDE" is selected for "3D MODE".
Note:
• The foot switch operation will be disabled while the SETUP menu is displayed.
@9 Save/Load profiles [USER PROFILE SAVE/LOAD]
By inserting the USB memory, SAVE (CAMERA→USB) or LOAD (USB→CAMERA) of the profile can be performed.
Select "ALL" to save or read all of six profiles, and select "SINGLE" to save or read one file.
Do not change the folder and file name to be created in the USB memory. If the names are changed, loading the profile will fail.
After saving or loading, the USB memory will be automatically unmounted. To operate the USB memory continuously, discon-
nect and insert it again.
Important:
• Do not edit the file and folder configuration created by pressing the [SAVE] button. It may result in load failure.
R
]
" (vertical flip), " R " (horizontal flip), " " (vertical and horizontal flip) on
39
Publicidad
