Policy and declaration by manufacturer - Electromagnetic emission
GP-UH532 is intended to be used in the electromagnetic environment specified below.
Ensure that this product is used in the following environment.
Immunity test
Electrostatic discharge (ESD)
immunity
IEC 61000-4-2
Power cable/signal cable fast
transient
Burst immunity
IEC 61000-4-4
Surge immunity
IEC 61000-4-5
Immunity to voltage dips/
short interruptions/ voltage
fluctuation
IEC 61000-4-11
Immunity to power frequency
magnetic field
IEC 61000-4-8
Note: U
represents AC power supply voltage before applying the test level.
T
4
IEC 60601
Test level
±6 kV, Contact
±6 kV, Contact
±8 kV, Air
±8 kV, Air
±2 kV for AC power
±2 kV for AC power
±1 kV for Signal line
±1 kV for Signal line
±1 kV, line to line
±1 kV, line to line
±2 kV, line to earth
±2 kV, line to earth
< 5 % U
< 5 % U
T
(> 95 % Dip, At U
)
(> 95 % Dip, At U
T
Within 0.5 cycles
Within 0.5 cycles
40 % U
40 % U
T
(60 % Dip, At U
)
(60 % Dip, At U
T
Within 5 cycles
Within 5 cycles
70 % U
70 % U
T
(30 % Dip, At U
)
(30 % Dip, At U
T
Within 25 cycles
Within 25 cycles
< 5 % U
< 5 % U
T
(> 95 % Dip, At U
)
(> 95 % Dip, At U
T
5 seconds
5 seconds
3 A/m (r.m.s.)
3 A/m (r.m.s.)
(50/60 Hz)
(50/60 Hz)
Compatible level
Electromagnetic environment - Policy
The floor material should be wood, con-
crete, or ceramic tiles. If the floor material is
covered by a synthetic substance, it is pro-
vided that the relative humidity is 30 % or
more.
Use typical, commercially available power
or dedicated one for hospital environment.
Use typical, commercially available power
or dedicated one for hospital environment.
Use typical, commercially available power
T
)
or dedicated one for hospital environment.
T
If using GP-UH532 during power failure, it
is recommended to use a uniterruptible
power system or batteries to supply power
T
)
to GP-UH532.
T
T
)
T
T
)
T
The power frequency magnetic field should
maintain the characteristic level measured
at a typical, commercially available or hos-
pital environment.