Panasonic GP-UH532C Manual De Instrucciones página 31

Note:
• To set up "SHUTTER", select "MANUAL" for "AE". (☞ Page 30)
• If flicker is observed under fluorescent lighting of 50 Hz, selecting "1/100" for the speed can reduce flicker.
e Set up pixel adding [BINNING]
The sensitivity can be improved by adding pixels.
The pixel adding mode can be selectable from the following:
OFF (default) : Sets the pixel adding off.
LINE MIX : Adds pixels in the vertical direction. (The vertical resolution will be deteriorated.)
PIX MIX : Adds pixels in the horizontal direction. (The horizontal resolution will be deteriorated.)
P/L MIX : Adds pixels in the vertical and horizontal directions.
(The horizontal and vertical resolutions will be deteriorated.)
r Adjust gain [GAIN]
Select a gain control setting from the following:
OFF : No gain adjustment
AUTO (default) : Automatic gain adjustment
The allowable maximum value for the automatic adjustment will be applied.
MANUAL(FIX) : Manual gain adjustment
The gain will be fixed at the set value.
MANUAL(VAL) : Adjust the gain with the [LEVEL] volume manually when "MANUAL" is selected for "AE". It enables finer
adjustment than "MANUAL(FIX)".
PF LABEL: •••••••••••••••• ID: PANA_DEFAULT
1
AE * AUTO LEVEL 32 [ 0
SHUTTER AUTO ---
BINNING OFF
GAIN * AUTO LEVEL 12 dB
LONG EXPOSURE OFF ---
AREA SELECTION ALL
PEAK/AVE LEVEL 8 [ 0 8 ]
*
HEAD GAIN OFF
[ EXPOSURE PICTURE CONTRAST PROFILE FUNC SYSTEM HEAD
t Set the long exposure [LONG EXPOSURE]
Select the long exposure from "OFF", "AUTO", or "MANUAL(FIX)", "FIX(×1)".
OFF (default) : Sets the long exposure off.
AUTO : Automatically controls the long exposure. The maximum value of automatic control will be set as the stor-
age time.
MANUAL(FIX) : Enables manual adjustment of the long exposure. The time will be fixed at the set storage time.
The storage time can be selected from "OFF", "×2", "×4", or "×8".
FIX(×1) : Disables the long exposure.
It is available when "MANUAL" is selected for AE.
63 ]
*
[ 3 * 12 ]
]
31