Panasonic GP-UH532C Manual De Instrucciones página 42

#8 Set the 3D mode [3D MODE]
The 3D mode can be selectable from the following:
OFF (default)
SIMULTANEOUS : Performs 3D output (simultaneous) from SDI1/2 output terminal and HDMI1/2 output terminal. Use two
SIDE-BY-SIDE
In the Advanced setting screen, set the following:
3D IMAGE POSITION ADJUST : Adjusts the view angle of the whole 3D video image.
L/R IMAGE DISPARITY ADJUST : Adjusts the image disparity of right and left views.
DOMINANT EYE SELECT
Important:
• To use the 3D functions, peripheral 3D optical devices are required.
• If considering using the 3D functions, contact your dealer.
• To use the HDMI output terminal, use a monitor which has the HDMI logo.
Note:
• When "SIMULTANEOUS" is selected, the video seen with the left eye will be output from SDI1 or HDMI1 output terminal;
the video seen with the right eye will be output from SDI2 or HDMI2 output terminal.
• When "SIDE-BY-SIDE" is selected, the 3D video will be output from SDI1 or HDMI1 output terminal; the 2D video will be
output from SDI2 or HDMI2 output terminal. By pressing the [PAGE] button for more than 1 second, the 3D video from
SDI1/HDMI1 output terminal can be switched to 2D video.
• To use the 3D function, set the function setup switch to 1080p output (2: ON/ 3: ON/ 4: OFF/ 5: OFF/ 6: OFF) or 1080i out-
put (2: OFF/ 3: OFF/ 4: OFF/ 5: OFF/ 6: OFF).
• When "3D MODE" is set, "DIGITAL ZOOM", "External synchronization", "FLIP AND MIRROR", and "DISPLAY RANGE(FHD)"
are disabled.
#9 Adjust the clock [TIME ADJUSTMENT]
Set the current time "month/day/year" and "hour/minute".
To determine the setting, move the cursor to "SET" and press the [SEL] button.
When using the USB memory data save function for profiles, make sure to set the time.
$0 Restore the profile default setting [USER PROFILE RESET]
Default settings are restored for all the items in the QUICK MENU, "EXPOSURE", "PICTURE", "CONTRAST", and "PROFILE" in
the ADVANCED MENU.
Step 1
Move the cursor to "USER PROFILE RESET" and press the
[SEL] button.
Step 2
The confirmation window "USER PROFILE RESET? YES/
NO" will be displayed.
If "YES" is selected, the default setting of the profile will be
restored.
Note:
• The "HEAD GAIN" of "EXPOSURE" will not be initialized.
42
: Sets the 3D output off.
cables to connect with the monitor.
: Performs 3D output (side by side) from SDI1 output terminal or HDMI1 output terminal. Use one cables
to connect with the monitor.
: Selects the dominant eye. When "SIDE-BY-SIDE" is selected, the video seen with the
dominant eye (right or left eye) will be output from SDI2 or HDMI2 output terminal.