Tech-Air 5-systeem Guia Del Usuario página 24

T r o u b l e s c a n n i n g Q R C o d e ? E n t e r m a n u a l l y
I n s e r t c o d e
Monitoring the System Status
The App provides information about the actual operating mode of the System, verifying
if the System is functioning correctly or not. The indication "System On" displayed on the
screen indicates that the System Check has been successfully passed and that the System
is active.
While riding "System On" mode is active and, accordingly, for safety reasons, the user cannot
access most of the App functions. In case the System needs to be disabled by the user, such
as during a heavy off-road riding session, the System can be turned off using the slide icon
on the App (as shown in Figure 12). To reactivated open and close the Front Flap (2).
The App will inform the user when there's only one deployment left before the mandatory
full service. In case of deployment, the App will show the relevant status as depicted in
Figure 12.
WARNING! User must always ensure via the App that the System is running the
most up to date software release. On first purchase of the System
check that your System has the latest software installed.
WARNING! Without any additional notice, Alpinestars reserves all rights to, from
time to time, update the software and or the electronic components
of the System. Accordingly, it is important that users register on the
Tech-Air App to receive instant notifications and updates.
WARNING! On every such notification the System must be sent for a service in
order that the gas inflators are replaced and the airbag is checked as
explained in Section 16 above.
S k i p
B A T T E R Y
9 4 %
M y T e c h - A i r ® M y L i d e
Figure 11
9:41 AM 100%
M y T e c h - A i r
C 1 2 3 4 5 6 7
S T A T U S
C o n n e c t e d
S t a r t r e c o r d i n g
P r o fi l e S e t t i n g s
25 EN