Tech-Air 5-systeem Guia Del Usuario página 28

CLASS AAA
TEST
GARMENTS
PERFORMED
EN 17092- 2:2020
Impact
120 km/h –
abrasion
75 mph
resistance
Tear
50 N
strength
Seam
12 N/mm
strength
Inflatable Protector
As a motorcyclist's inflatable protector, this is certified under the Regulation EU 2016/425,
according to the EN 1621-4:2013 standard, only in the applicable parts, Impact and
Ergonomic Requirements only.
The EU examination was conducted by:
- Notified Body #0598 SGS Fimko Oy, Takomotie 8, 00380, Helsinki, Finland
The explanation of the product markings are as follows:
Indicates that
an inflatable
protector is
installed
Garment Size
(Waist to
Shoulder) Sizing.
See Table in
Section 6
CLASS OF PROTECTION
CLASS A
CLASS AA
GARMENTS
GARMENTS
EN 17092- 3:2020
EN 17092- 4:2020
70 km/h – 45 km/h –
43 mph 28 mph
40 N 35 N
8 N/mm 6 N/mm
EU 2016/425 CAT II
AIRBAG
2
CB
44 - 48 cm
CLASS C
CLASS B
OVERGARMENT
GARMENTS
GARMENTS
EN 17092- 5:2020
EN 17092- 6:2020
45 km/h – 45 km/h –
28 mph 28 mph
35 N 35 N
6 N/mm 6 N/mm
ABS520
0080
AIRBAG MODULE
0080.P1.15.0023
CLASS C
UNDERGARMENT
GARMENTS
EN 17092- 6:2020
Not
applicable
10 N
4 N/mm
Product
Identification
Code
Indicates that
the product is
for motorcycle
use, meets
Central Back,
Level 2 airbag
requirements
Name of the
Manufacturer
29 EN