Roger Technology B70/2DC Instrucciones Y Advertencias Para El Instalador página 36

n0 01
Version HW
n1 23
Year of manufacture
n2 45
Week of manufacture
n3 67
n4 89
Serial number
n5 01
n6 23
FW version
The serial number is obtained by combining the values of the parameters from
example this table shows the values (next to the parameters, they are not default values) from which
you get the serial number
o0 01
Operations performed
o1 23
The number of operations performed is obtained by combining the values of the parameters from
o0 o1
to and by adding 2 zeros. For example this table shows the values next to the parameters
(they are not default values) from which you get the operation number
operations.
h0 01
Manoeuvre hours performed
h1 23
The number of manoeuvre hours performed is obtained by combining the values of the parameters
h0 h1
from to
values) from which you get the manoeuvre number
d0 01
Days the control unit is on
d1 23
The number of days the control unit is on is obtained by combining the values of the parameters
d0 d1
from to
values) from which you get the manoeuvre number
on.
36
01 23 45 67 89 01 23
. For example this table shows the values next to the parameters (they are not default
. For example this table shows the values next to the parameters (they are not default
01 23
i.e. manoeuvre hours.
01 23
i.e. 123 days of the control unit being
n0 n6
to . For
01 23
00, i.e. 12300