3M PELTOR WS LiteCom Plus MT73H7A4310WS6EU Manual Del Usuario página 17

on your Bluetooth device. A voice message confirms when
®
the pairing is complete, "pairing complete" and "connected".
NOTE: You can always stop the pairing process by a long press
(2 seconds) on the Bluetooth
®
NOTE: Only one of the two paired devices can be a two-way
radio. The headset only supports PTT over Bluetooth
two-way radio supports 3M™ PELTOR™ Push-To-Talk protocol.
If you have any questions, please contact your local distributor.
NOTE: When a third Bluetooth
one of the previously paired devices is removed from the
headset. If one of the devices is connected, the unconnected
device is removed. Otherwise, the first paired device is
removed.
NOTE: By default, the radio VOX functionality is disabled
when taking a phone call via a Bluetooth
the call has ended, VOX is automatically activated. To
transmit on the two-way radio during a phone call, press the
PTT button. If the PTT button is pressed during a phone call,
your voice will only transmit through the two-way radio and
not to the phone call.
8.5.4. *RECONNECTING BLUETOOTH
When the headset is powered on, it tries to reconnect to all
paired device(s) during 5 minutes. A voice message will
confirm the connection, "connected".
NOTE: If the link is lost, a voice message will confirm with
"disconnected".
SMART TIP: If a Bluetooth
device(s) is paired but not
®
connected and the headset is on, press the Bluetooth
to reconnect to all paired device(s) in the Bluetooth
A voice message will confirm the connection, "connected".
8.5.5. *ANSWER A PHONE CALL
(Figure 4)
When the headset is connected to a phone via Bluetooth
wireless technology and there is an incoming call, answer
by short pressing (~0.5 seconds) the Bluetooth
(Figure 4).
8.5.6. *REJECT A CALL
(Figure 4)
Press and hold (~2 s) the Bluetooth
reject a phone call.
8.5.7. *TOGGLE BETWEEN PHONE AND HEADSET
(Figure 4)
When a call is active, it is possible to transfer the audio to the
phone instead of using the headset. Press (~2 seconds) the
Bluetooth button (Figure 4). To return the call to the headset,
®
press (~2 seconds) the Bluetooth
8.5.8. *END A PHONE CALL
(Figure 4)
To end an ongoing phone call, short press (~0.5 seconds) the
Bluetooth button (Figure 4).
®
8.5.9. *VOICE DIAL
(Figure 4)
To enable voice dial, long press (~2 seconds) the Bluetooth
button (Figure 4).
button (Figure 4).
if the
®
device is successfully paired,
®
connection. Once
®
DEVICES
®
button
®
range.
®
®
button
®
button (Figure 4) to
®
button once more.
®
* Only WS (Bluetooth
8.5.10. *ANSWER A PHONE CALL FROM THE SECOND
PAIRED PHONE UNIT DURING AN ONGOING
CALL
(Figure 4)
When a call is active, it is possible to answer an incoming call
from the second paired phone. Answer by a short press (~0.5
seconds) on the Bluetooth
8.5.11. *CONTROL BLUETOOTH
(A2DP)
(Figure 4)
Play/pause streaming
Short press (~0.5 seconds) the Bluetooth
Skip to next track
Rapidly double press (2x~0.5 seconds) the Bluetooth
button.
Skip to previous track
Rapidly triple press (3x~0.5 seconds) the Bluetooth
DID YOU KNOW: Audio playback will be automatically paused
from the audio playback unit when you have a call in progress or
two-way radio message. After ending the call / message, the
audio playback will automatically start again.
8.5.12. *TRANSMITTING AND RECEIVING MESSAGES ON
A BLUETOOTH
(Figure 4)
Press the Bluetooth button (Figure 4) to transmit and
®
release to receive message.
8.5.13. *ADJUST BLUETOOTH
(Figure 3)
Short press (~0.5 seconds) the [+] or [–] button to adjust the
volume on an active paired Bluetooth
9. MENU FUNCTIONS
The headset includes the following menu categories:
• Main Menu
• Sub Menu
• Set-up Menu
The menus are described below and refers to figure 8 - 10.
9.1. MAIN MENU
(Figure 8)
Menu options:
• Channel
• Radio volume
• Ambient listening
• Phone volume
• Streaming volume
• *Bluetooth radio volume
®
To enter the menu, make a short press (~0.5 seconds) on the
On/Off/Mode button. Use the On/Off/Mode button to navigate
through the menu and the [+] and [–] buttons to adjust the
settings.
After 7 seconds of inactivity, the headset will exit the menu.
The options in the Main Menu are described in the following
®
chapters.
) models
®
button (Figure 4).
®
STREAMING AUDIO
®
button.
®
button.
®
CONNECTED TWO-WAY RADIO
®
VOLUME
®
device.
®
EN
®
6