3M PELTOR WS LiteCom Plus MT73H7A4310WS6EU Manual Del Usuario página 18

EN
9.1.1. CHANNEL
Lists all the programmed channels for Europe/ANZ in the
headset, up to:
• 16 for PMR
• 69 for LPD
Default: 1.
9.1.2. RADIO VOLUME
Adjusts the volume level of the incoming radio sound.
(OFF, 1–6) Default: 3.
9.1.3. AMBIENT LISTENING
(level-dependent microphones)
Adjusts the ambient listening volume level.
Ambient listening helps protect your hearing from potentially
harmful noise levels. Constant rumbling and other potentially
harmful noises are reduced, but you can still speak normally
and make yourself heard. The ambient listening volume
adjusts the level-dependent function for ambient sound.
(OFF, 1–6) Default: 3.
9.1.4. PHONE VOLUME, STREAMING VOLUME AND
*BLUETOOTH RADIO VOLUME
®
Depending on which sound source is connected, you can
adjust the volume on Bluetooth
(OFF, 1–6) Default: 3.
SMART TIP: When browsing long lists such, as channels,
press and hold either the [+] or [–] button to skip ten items at
the time.
SMART TIP: The headset will automatically exit the menu
after 7 seconds. A beep will confirm the menu has been
exited.
9.2. SUB MENU
(Figure 9)
Menu options:
• VOX
• Sub Channel
• Squelch
• Power (only PMR versions)
• Bluetooth pairing
®
• Language
To enter the sub menu, press (1 second) on both the [+] and
[–] button at the same time. Use the On/Off/Mode button to
navigate through the menu and the [+] and [–] buttons to
adjust the settings.
The options in the Sub Menu are described in the following
chapters.
9.2.1. VOX
(Voice operated transmission)
This allows radio transmission without pressing the PTT
button. Adjust the threshold of voice operated transmission.
("VOX off" - "VOX low" - "VOX medium" - "VOX high")
Default: VOX Medium.
7
radio, phone or streaming
®
* Only WS (Bluetooth
9.2.2. SUB CHANNEL
(Refer to table M and N)
Sets the subchannel according to tables (M) and (N) if it is
enabled. (OFF, 1–121) Default: OFF.
9.2.3. SQUELCH
(hiss reduction)
Squelch means that background hiss in the earphones is
prevented when the incoming signal is below the set squelch
level. ("Squelch off" - "Squelch low" - "Squelch medium" -
"Squelch high")
Default: Squelch medium.
9.2.4. POWER
Adjusts Power level (only PMR versions).
This feature controls the power level of the radio transmitter.
There are two output power levels: low and high. The low setting
will reduce the communication range but increase the battery life.
("Power" - "High/low power") Default: Low power.
9.2.5. *BLUETOOTH PAIRING
®
(Figure 11)
When the voice message says "Bluetooth
press (~0.5 seconds) the [+] button to start pairing. A voice
message will confirm, "Bluetooth
select "WS LiteCom Plus" on your Bluetooth
A voice message will confirm when pairing is complete,
"pairing complete" and "connected". Short press
(~0.5 seconds) the [+] button to stop the pairing.
A voice message will confirm, "pairing failed".
NOTE: To stop pairing, short press (~0.5 seconds) the
Bluetooth button.
®
9.2.6. LANGUAGE
Adjusts the ghost voice language between all installed
languages. ("English" - "Spanish" - "French" - "German")
Default: English.
After 7 seconds of inactivity, the headset will exit the menu.
9.3. SET-UP MENU
(Figure 10)
Menu options:
• BCLO
• Max. Transmission Time
• Automatic Power Off
• Microphone Input
• External Input Sensitivity
• *Bluetooth Streaming
®
• *Bluetooth Phone
®
• *Bluetooth Multipoint
®
• Reset
To enter the set-up menu, have the headset in off mode and
press (~2 seconds) on both the PTT and On/Off/Mode button
on the right cup at the same time. Use the On/Off/Mode button
to navigate through the menu and the [+] and [–] buttons to
adjust the settings.
To exit the set-up menu, turn the headset off.
The options in the Set-Up Menu are described in the following
chapters.
) models
®
pairing", short
®
pairing on". Search and
®
device.
®