System Settings; Calibration Settings - Xylem SI Analytics TitroLine 6000 Manual De Instrucciones

152
Chapter 5 - System Settings

5 System settings

Fig. 107
From the main menu (Fig. 107), <SYS>/<F7> will get you to the system settings:
Fig. 108
Setting the national language was already described in Chapter 2.5.

5.1 Calibration settings

The Calibration settings item is used to select the buffers for the calibration of the pH electrode as well as to set
the temperature of the buffer solution. The temperature has only to be set if neither a resistance thermometer (Pt
1000), nor a pH electrode with an integrated temperature measurement probe is connected.
Fig. 109