Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
96
2.4 Connecting the Titrator - Combination with Accessories and Additional Devices
2.4.1
Back panel of the titrator TitroLine
1
2
3
4
Fig. 4
2.4.2
Connection ports of the TitroLine
®
The TitroLine
6000/7000 is equipped with the following connections:
1) µA measurement input for the connection of double platinum electrodes
2) Temperature measurement input for connecting Pt 1000 electrodes
3) pH/mV measurement input (DIN or BNC through adapter) for the connection of pH, redox and other
measurement or combination electrodes. Connection of SI Analytics ID electrodes to TitroLine
chapter 2.4.6.
4) Measurement input for reference electrodes (Ref.)
5) USB-B interface for connection to a PC
6) On/Off switch
7) Two USB-A ("Master") interfaces for connecting USB devices such as a keyboard, printer, manual control
unit, USB memory device etc.
8) Socket "in": Connection of the external power pack/supply TZ 1853
9) Socket "out": Connection of the TM 235 magnetic stirrer
10) Two RS232 ports, 4-channel (Mini-DIN):
RS1 for connection to the PC
RS2 for connection of a weighing balance and other devices from SI Analytics (burettes, sample
changers)
2.4.3
Connecting a printer
Printers with a USB interface are to be connected to one of the two USB-A interfaces. These printers have to
feature HP PCL emulation (3, 3GUI, 3 enhanced, 5, 5e). So-called GDI printers cannot be used!
Alternatively the thermo-compact printer Seiko S445 can be connected.
2.4.4
Connecting a USB device (manual controller, keyboard, memory device, hub)
The following USB devices can be connected to the USB-A interfaces:
•
PC-keyboard
•
TZ 3880 manual controller (in the following: "mouse")
•
Printer
•
USB storage devices, e.g. USB sticks
•
USB hub
•
USB barcode scanners
Chapter 2 - Unpacking and first Operation
®
6000/7000
®
6000/7000
5
6
7
8
9
10
®
7000 see
Publicidad
Capítulos
Tabla de contenido
