Initial Filling Or Rinsing Of The Entire Interchangeable Unit - Xylem SI Analytics TitroLine 6000 Manual De Instrucciones

103
Chapter 2 - Unpacking and first Operation
If you selected <Yes>, the values will be written into the interchangeable unit. You can see this from a message
in red colour displayed at the bottom. Upon completion, the left bottom corner of the display will show the new
name of the reagent (fig. 15). In the present case this is NaOH 0.1 mol/L.
Fig. 15

2.8 Initial Filling or Rinsing of the Entire Interchangeable Unit

Initial filling of the interchangeable unit is done using the <rinsing > rinsing programme.
Fig. 16
On the main menu (fig. 16), press <MODE> key to navigate to the methods/system (fig. 17).
Fig. 17