Interchangeable Unit - Reagents - Xylem SI Analytics TitroLine 6000 Manual De Instrucciones

154
Fig. 113
After having determined the buffers for buffers 1 - 3, the selection is to be confirmed with <Accept values>. If the
distance between 2 buffer values is too small (for instance, buffer 1 "6.87" and buffer 2 "7.00"), an error message
will appear:
Fig. 114

5.2 Interchangeable Unit - Reagents

Each interchangeable unit is equipped with an RFID transponder. This transponder can be used to store the
following information:
• Unit size: (the default setting, cannot be changed)
• Unit ID: (default setting, cannot be changed)
• Reagent name: (default: blank)
• Concentration: (default: 1.000000)
• Concentration determined on: (Date)
• To be used until: (Date)
• Opened/Produced on: (Date)
• Test according to ISO 8655: (Date)
• Charge description: (default: no charge)
• Last modification: (Date)
Fig. 115
Chapter 5 - System Settings