Print Method; Change Method Parameters; Method Type - Xylem SI Analytics TitroLine 6000 Manual De Instrucciones

123
Chapter 4 Method Parameters

4.5 Print method

The currently selected method can be printed on a connected printer or stored on a USB drive as pdf file.
Fig. 65 b

4.6 Change Method Parameters

The input or modification of the method name was already described in Chapters 4.1 and 4.3.
Fig. 66
4.6.1

Method type

On the <Method type> you can select whether you wish to perform a manual or automatic titration, a dosage or
whether you wish to prepare a solution.
Fig. 67
The selection of the Method type will have an influence on the further parameterisation of the method. For
instance, if you select the dosing mode, neither a selection of a formula nor a change of the Titration mode
(dynamic or linear, etc.) will be available.