Rs232 Settings - Xylem SI Analytics TitroLine 6000 Manual De Instrucciones

156
Chapter 5 - System Settings

5.3 RS232 Settings

®
The <RS232 settings> item can be used to determine the device address of the TitroLine 6000/7000 and set the
parameters of the two RS232 interfaces independent from each other:
Fig. 119
The device address can be set from 0 – 15. Address 1 is the default setting:
Fig. 120
The baud rate is preset to 4800. It may be set to 1200 – 19200:
Fig. 121