Publicidad
Idiomas disponibles
Idiomas disponibles
Pay attention to the dimension Fig. 4 during the corner installation to allow
opening of the door of the appliance. Fig. 5 The dimension depends on the thick-
ness of the front face of the furniture placed under the handle.
Fig. 6
n
The fact that the oven becomes lighter when the door and the accessories are
removed facilitates in the placement of the oven inside the cabinet.
n
Place the appliance by centering it inside the built-in appliance cabinet.
n
Screw the appliance securely.
n
The clearance between the worktop and the appliance shall not be closed with
additional sills or mouldings.
Installing the screw without drilling a hole suitable for the screw diameter in
the furniture may cause damage to your furniture.
n
Be careful not to damage the installation holes by applying too much pressure
on the screws during installation.
n
The appliance may be installed on a high-placed cabinet or under the counter
as desired.
n
We recommended you to provide a minimum clearance of 70 mm from the
rear of the kitchen unit where the oven is installed
n
Parts that provide insulation and protection shall be installed so that they
cannot be removed by using any tool.
n
When a built-in stove is installed on the counter on top of the oven, power
cords of the oven and the stove shall be separated for safety purposes and to
ease the removal of the oven from this stove when required.
The appliance shall always be installed by an Authorized Service. Our company
shall not be held responsible for damages that may occur on people, surroundings
or other materials due to incorrect installation of the appliance.
Inspect the appliance after opening the packaging. Do not perform the connection
of the appliance in case of a transport damage.
12.07.2021
OVEN USER GUIDE EN
INSTALLATION OF APPLIANCE
15
Publicidad
