Function Buttons And Display; Switching On Or Commissioning; Display Function Modes; Parameter Display Mode - Roger Technology H70/200AC Instrucciones Y Advertencias Para El Instalador

7

Function buttons and display

UP
DOWN
PROG
• Press the UP and/or DOWN
• Use the + and - buttons to modify the value of the parameter. The value starts to flash.
• Press and hold the + or - button to scroll quickly through values, to modify the parameter more quickly.
• To save the new value, wait a few seconds or move onto another parameter with the UP
flashes rapidly to indicate that the new value has been saved.
• Parameters can only be modified while the motor is not running. Parameters can be viewed at any time.
8

Switching on or commissioning

Power the control unit.
The firmware version of the control unit is displayed briefly. See chapter 9.
9

Display function modes

9.1

Parameter display mode

PARAMETER PARAMETER
See chapter 11 for detailed descriptions of parameters.
54
TEST
buttons to view the parameter you intend to modify.
VALUE
BUTTON DESCRIPTION
UP Next parameter
DOWN Previous parameter
+ Increase value of parameter by 1
- Decrease value of parameter by 1
PROG Programme travel
TEST Activate TEST mode
or DOWN button. The display