Tyre Inflation; Inflating The Tyre; Safety Instructions; Risk Of Explosion - SICE S 1000 Manual De Instrucciones

5.6. TYRE INFLATION

5.6.a. SAFETY INSTRUCTIONS
Check that both the upper and lower beads and the rim bead
seat have been suitably lubricated with approved paste for
mounting.
Safety goggles with plain lenses and safety footwear must
be worn.
Clamp the rim on the turntable during inflation.
Remove the valve stem core if not already done (Fig. 25a).
Connect the inflation hose to the valve stem (Fig. 25b).
Avoid personal injury. Carefully read, understand and follow all instructions.
1. Overinflated tyres can explode, producing hazardous flying debris that may result in
an accident.
2. Tyres and rims that do not have the same diameter do not correspond. Do not attempt
to mount or inflate tyres with rims that do not correspond. For example, never mount a
16" tyre on a 16.5" rim, (or vice versa). It is very dangerous. Tyres and rims that do not
correspond could explode, causing accidents.
136

RISK OF EXPLOSION

Never exceed the pressure recommended by the
tyre manufacturer. Never mount tyres on rims with
a different diameter
An exploding tyre can cause personal injury or
death.
Press the
pedal to inflate the
tyre and make the beads adhere. Stop frequently
to check the air pressure in the tyre on the pres-
sure gauge (1, Fig. 26d).
25b
CAUTION!
DANGER
User manual S 1000
25a