Operator Position - SICE S 1000 Manual De Instrucciones

- Revolver head with automatic or console-activated bidirectional vertical stroke, for bead
breaking and obtaining optimal mounting.
and demounting of the tyre without the need to use the bead lifter lever.
- Pneumatic wheel lift, to load and unload the wheel from the work area.
Controls are grouped on:
- an adjustable ergonomic console,
- a touch screen, for configuring and viewing machine functions, and a pedal unit.
This configuration allows the operator to work safely, without having to move from his
work station.
Each machine has a data plate Fig. 7, with information about the machine and some
technical data.
As well as the manufacturer's details, the plate indicates:
Mod. - Machine model;
V - power supply voltage in Volts;
A - Input voltage in Amperes;
kW - Absorbed power in kW;
Hz - Frequency in Hz;
Ph - Number of phases;
bar - Operating pressure in bar;
Serial No. - serial number of the machine;
ISO 9001 - Certification of the company's Qual-
ity System;
EC - EC marking.

4.1. OPERATOR POSITION

Fig. 8 illustrates the operator positions during the various operating phases:
A wheel loading only
B other operations
The display for configuring and display-
ing wheel data, the operating console
and pedal unit are on the same side
of the machine. This side is the work
station of the operator using the ma-
chine. The operator may operate on
the wheel and machine controls from
this position only. In these conditions,
the operator can carry out, monitor and
check the outcome of all tyre change
operations and take action in the case
of any unforeseen events.
User manual S 1000
A
7
UK
B
8
119