Demounting - SICE S 1000 Manual De Instrucciones

11 - Lubricate the bead to make bead breaking
easier (Fig. 21f).
12 -Press the pedal to turn the turntable.
13 - Operate the control, tapping on it, to
lower the bead breaker disc and fully remove the
bead from its seat on the rim.
21d
14- Turn at least one rotation to finish upper bead
breaking.
15 - Move the lever upward to automatically
stop penetration and to withdraw the disc from the
work area.
5.4.c. DEMOUNTING
21e
1- Press the
button to move the demounting
tool to the work position (Fig. 22a).
2- Move the lever downwards to place the
demounting tool in contact with the tyre (Fig. 22b).
3- Rotate the wheel, exercising pressure on the
21f
pedal while moving the lever
downwards until completely inserting the mobile
tool under the bead (Fig. 22c).
4- Keeping the wheel in rotation, press and hold
down the button to hook the bead.
22a
User manual S 1000
130