Inflating Tyres - SICE S 1000 Manual De Instrucciones

3. Never exceed the inflation pressure for the tyre (as read on the pressure gauge) indi-
cated by the manufacturer on the side of the tyre itself.
4. Never place your head or any part of your body over a tyre during the inflation process
or when attempting to seat beads.
This machine is not intended to be a restraining device for exploding tyres, tubes or rims.
5. Always stand back from the tyre changer when inflating, never lean over.
During this operation, noise levels assessed at 85 dB(A) may occur.
Therefore operators are advised to wear hearing protection devices.
The breakage of a pressurised rim or tyre could cause an explosion that projects
the wheel to the side or upwards with a force that could cause damage, serious
injuries or even death!
Do not mount tyres on rims without first checking the exact correspondence of the
dimensions (printed on the rim and tyre) and for the presence of defects or damage.
This tyre changer is NOT a safety device and does not eliminate risks and damage
from a possible explosion. Keep all other persons away from the work area.
5.6.b. INFLATING TYRES
1. Ensure the wheel is clamped securely on the
turntable by the centring handle (Fig. 26a).
2. Ensure that the tool holder head, the lower
bead breaker and the bead depressor are out of
the work area and, if possible, in the rest position.
3. Remove the valve stem core if not already done
(Fig. 26b).
4. Connect the Doyfe inflation fitting of the hose
to the valve stem (Fig. 26c).
26B
User manual S 1000
CAUTION!
CAUTION!
UK
26A
26c
137