Desktop Power Macintosh; Installation; Getting Started - Sonnet Tempo Ultra ATA66 Manual De Instalación

Chapter 3

Desktop Power Macintosh

Installation

This chapter contains instructions for installing the
Tempo Ultra ATA66 into a desktop-based Power
Macintosh (such as the Power Macintosh 7200,
7300, 7500, 7600). If your computer does not resem-
ble those pictured in this chapter, or you would pre-
fer a quick install approach, refer to the general
installation instructions in Chapter 2.

Getting Started

We suggest you inventory and arrange the
following items in front of you prior to proceeding
with the installation:
• Tempo Ultra ATA66 Macintosh PCI Host Adapter
• Ultra ATA66 cable
• IDE hard drive
• Medium Phillips screwdriver
• Small flat blade screwdriver
• Needle nose pliers
• Hard drive mounting screws
Support Note:
make a backup of important information
on your system's current hard drive(s) prior to
installing new hardware or software. When
handling computer products, you must take care
to prevent components from being damaged by
static electricity. Always ground yourself by touch-
ing a metal part of the computer such as the
power supply's metal case and work in an area
free of static electricity; avoid carpeted areas.
Handle the Tempo only by its edges, and avoid
touching connector traces and component pins
on PCI cards, hard drives, and other IDE devices.
We recommend you
3-1