Tabla de contenido
Publicidad
AMPROBE
8.5.2. "METER" mode
In this mode the instrument shows the below screens according to the settings made as
per paragraph 8.1.
The symbols used are described in Tab. 2.
For eventual messages displayed see appendix 1 – MESSAGES DISPLAYED.
Following keys are enabled:
F1:
F2:
F3/F4:
SAVE:
27.09.00
SINGLE PHASE
CURRENT
I1
Ipk1
ThdI
freq
CLAMP TYPE: FLEX
HARM.
WAVE
Example of screen
to pass to "HARMONIC" mode (see paragraph 8.5.3).
to pass to "WAVE" mode (see paragraph 8.5.4).
to pass to previous/next function respectively.
to save in the instrument memory a record of "Smp" type (see
paragraph 9.2) containing the instantaneous values of voltage and
current present on the instrument inputs. This function is disabled
during a recording.
17:35:12
= 30.21 A
= 49.53 A
= 23.06 %
= 50.0 Hz
PG-
PG+
MULTITEST2000
Publicidad
Capítulos
Tabla de contenido
