Meter" Mode - Amprobe MultiTest 2000 Manual De Usuario

AMPROBE

8.4.2. "METER" mode

In this mode the instrument shows the below screens according to the settings made as
per paragraph 8.1.
The symbols used are described in Tab. 1.
For eventual messages displayed see appendix 1 – MESSAGES DISPLAYED.
Following keys are enabled:
F1:
F2:
F3/F4:
SAVE:
27.09.00
SINGLE PHASE
VOLTAGE
V1
Vpk1
ThdV
freq
HARM. WAVE
Example of screen
to pass to "HARMONIC" mode (see paragraph 8.4.3).
to pass to "WAVE" mode (see paragraph 8.4.4).
to pass to previous/next function respectively.
to save in the instrument memory a record of "Smp" type (see
paragraph 9.2) containing the instantaneous values of voltage and
current present on the instrument inputs. This function is disabled
during a recording.
17:35:12
= 230.2 V
= 325.5 V
= 0.0 %
= 50.0 Hz
PG- PG+
MULTITEST2000