Saving Results; Saving Safety Test Results - Amprobe MultiTest 2000 Manual De Usuario

AMPROBE

9. SAVING RESULTS

The SAVE button can be used to store the displayed results related to the rotary switch
position:
SAFETY TEST and for AUX rotary switch position: pressing this key the instrument will
store the displayed result generating a corresponding record in the SAFETY TEST
MEMORY (see paragraph 11.1)
ANALYZER rotary switch position: pressing this key the instrument will store the
displayed result generating a "Smp" record in the ANALYZER MEMORY (see
paragraph 11.2)
Please note that Saving results is different from recording.
9.1.

SAVING SAFETY TEST RESULTS

After a SAFETY TEST (function LOWΩ, MΩ, RCD, LOOP, Phase sequence, EARTH) or
during a real time measurement in AUX position the user can press the SAVE button to
store the displayed result.
The REMINDER
PLACE parameter
isn't related
Measurement
Number and can help
the user to remind the
place where
performed
measurement.
to
Order
SAVE IN LOC. 006
OK? (SAVE/ESC)
he
the
REMINDER PLACE:009
05.06.01
Memory Location
REMINDER PARAMETER
↓
↑
MULTITEST2000