Tabla de contenido
Publicidad
AMPROBE
MULTITEST2000
If you wait more than about 10 seconds the display will return to the meter mode and the
instrument will continue recording. If you insert a wrong password the message "Password
error" will be displayed under "PASSWORD". After a few seconds the display will return to
meter mode and the instrument will continue recording. In order to enable/disable this
option the correct password will have to be entered. The display will return to meter mode
and START/STOP will have to be pressed again to stop the recording. You will then need
to re-enter the "ANALYZER CONFIG" menu and scroll up or down to the item
"PASSWORD: ON" using the multifunction keys F1 and F2. Then turn the password off by
pressing the multifunction keys F3 and F4.
Publicidad
Capítulos
Tabla de contenido
