Tabla de contenido
Publicidad
AMPROBE
5.3.
HOW TO SET THE LANGUAGE
By pressing the multifunction keys F1 and F2, position the cursor on the LANGUAGE (EN)
or LINGUA (IT) item and confirm it by pressing the ENTER key.
By pressing the multifunction keys F1 and F2, position the cursor on the desired language
and press the ENTER key to SAVE the change or press ESC to cancel the modification.
This setting will remain unchanged after turning off the instrument.
5.4.
HOW TO ADJUST THE COUNTRY
By pressing the multifunction keys F1 and F2, position the cursor on the COUNTRY item
and confirm it by pressing the ENTER key. By pressing the multifunction keys F1 and F1,
select the Country among the following possibilities:
UE_m: European Countries: Distance setting in "meter" for Resistivity measurement
US_m: United States: Distance setting in "meter" for Resistivity measurement
US_ft:
United States: Distance setting in "feet" for Resistivity measurement
Press the ENTER key to SAVE the change or press ESC to quit the modification.
This setting will remain unchanged after turning off the instrument.
MULTITEST2000
Publicidad
Capítulos
Tabla de contenido
