Results Of "Man" Mode - Amprobe MultiTest 2000 Manual De Usuario

AMPROBE

6.2.2. Results of "MAN" mode

At the end of the test if
the insulation
resistance is
than R (see Table2)
MAX
and the instrument
generates
Nominal test Voltage,
the instrument emits a
double
indicating the positive
outcome of the test
and displays a screen
similar to the screen to
the right.
In order to evaluate the test you must compare the result with the limits indicated in the
Guidelines (see Table1).
The displayed result can be stored pressing the SAVE key twice (according to
paragraph 9.1).
If the Insulation
resistance is
than R (see Table2),
MAX
the instrument emits a
double beep at the end
MΩ
lower
1.07
the
514V
beep,
MAN 500V
FUNC VNOM
MΩ
higher
> 999
Insulation Resistance
05.06.01
Voltage during the Test
MΩ
Duration of the Test
Test mode
15s
Test voltage set
Maximum resistance value
05.06.01
which can be measured
(999Ω is displayed if a
Ω
rated voltage of 500V was
M
selected, see Table2).
MULTITEST2000