Results Of "Tmr" Mode - Amprobe MultiTest 2000 Manual De Usuario

AMPROBE

6.2.3. Results of "TMR" mode

At the end of the test if
the Insulation
resistance is
than R (see Table2)
MAX
and the instrument
generated
Nominal test Voltage,
the instrument emits a
double
indicating the positive
outcome of the test
and displays a screen
similar to the screen to
the right.
The displayed result can be stored by pressing the SAVE key twice (according to
paragraph 9.1).
If the Insulation
resistance is
than R (see Table2),
MAX
the instrument emits a
double beep at the end
of the test indicating
MΩ
lower
1.07
the
514V
beep
TMR 500V
FUNC VNOM
MΩ
higher
> 999
Insulation Resistance
05.06.01
Voltage during the Test
Ω
M
Duration of the Test
Test mode
15s
TIME:60s
↓
Maximum resistance value
05.06.01
that
(999Ω is displayed if a
Ω
rated voltage of 500V was
M
selected, see Table2).
The symbol ">" means that
MULTITEST2000
can be measured