Voltage" Function; Symbols - Amprobe MultiTest 2000 Manual De Usuario

AMPROBE
8.4.

"VOLTAGE" FUNCTION

This function permits you to display in real time the RMS value of AC/DC voltage,
the peak, the Thd value (see paragraph 16.6), the waveform and the harmonic
spectrum of the voltage.

8.4.1. Symbols

The VOLTAGE position has three working modes:
METER
WAVE
HARM
These modes will be described in detail in the next paragraphs.
The symbols used are described below:
Symbol Description
V1 Voltage RMS value
Vpk1 Peak value of the voltage
h01 ÷ h49 Harmonic 01 ÷ Harmonic 49.
ThdV Factor of total harmonic distortion of the voltage (see paragraph 16.6).
freq Network frequency
Tab. 1: Symbols used in the position VOLTAGE
MULTITEST2000