Results Of "Auto" Mode - Amprobe MultiTest 2000 Manual De Usuario

AMPROBE

6.1.3. Results of "AUTO" mode

At the end of the test, if
the average resistance
value Ravg is lower
than 5Ω the instrument
emits a double sound
signal indicating
positive outcome
the test and displays a
screen similar to the
screen to the right.
The displayed result can be stored by pressing the SAVE key twice (refer to
paragraph 9.1).
LOWΩ
1.05Ω
R+
the
1.07Ω
of
219mA
AUTO 0.11Ω
FUNC CAL
Average resistance value
05.06.01
(Ravg)
R-
Resistance
1.03Ω
corresponding test currents
219mA
obtained after exchanging
the polarities of test leads
MULTITEST2000
values and