Front Panel Keys - Mettler Toledo IND570 Manual De Instalación

•
1.10.2.

Front Panel Keys

Four dedicated scale function keys are located below the five softkeys. These provide the interface to
zero and tare the scale, clear a tare or data entry, and to initiate a print.
The terminal's 12-key alphanumeric keypad is used to enter data and commands. The
alphanumeric keys are located on the upper-right side of the terminal front panel. Refer to Chapter
2, Operation, for additional details about the entry of alphanumeric data.
Five navigation keys are located below the alphanumeric keypad. These keys enable the operator to
navigate through setup options in the menu tree and within setup and application screens.
30205319 | 11 | 07/2019
Operation, provides more detailed information about all home screen softkeys, in the Softkeys
and Icons section.
To the right of the softkey icon area, space is reserved for MORE UP ( ) or MORE DOWN ( )
symbols. If present, these indicate additional softkey selections are available by pressing the
UP or DOWN navigation keys. Up to 15 softkeys, presented in three sets of five, can be
programmed for the home position, depending upon the weighing options and terminal
functions enabled. The softkey setup and key mapping capabilities of the terminal determine the
row and position of each softkey.
METTLER TOLEDO IND570 Terminal Installation Manual 1-25