Auto Start and Auto Resume
Setting Group
AUTO START
AUTO RESUME
SPEED THRESHOLD
Auto Stop
Setting Group
AUTO STOP
SPEED THRESHOLD
Auto Split
Setting Group
AUTO SPLIT
DISTANCE
TIME
Auto Timer
Select ON to start the chronograph automatically when you move at or above the
speed threshold. Select OFF to disable auto start.
Select ON to restart the chronograph automatically after you stop and then begin
moving again at or above the speed threshold. Select OFF to disable auto resume.
Enter the speed at which the chronograph will automatically start. Press
the setting change window. The minimum is 0.10. The maximum is 99.99.
Select ON to stop the chronograph automatically when you go below the speed
threshold. Select OFF to disable auto stop.
Enter the speed at which the chronograph will automatically stop. Press
the setting change window. The minimum is 0.1. The maximum is 99.99.
Select DISTANCE to automatically take a split when you reach a multiple of the
selected distance. Select BY TIME to automatically take a split each time the
selected time interval elapses. Select OFF to disable auto split.
Enter the distance at which to automatically take a split. Press
setting change window. The minimum is 0.10. The maximum is 99.99. NOTE: This
setting is only available if the Auto Split setting is set to DISTANCE.
Enter the elapsed time at which to automatically take a split. Press
setting change window. The minimum is 00:00:01. The maximum time is 9:59:59.
NOTE: Time settings are only available if the Auto Split setting is set to BY TIME.
22
Adjustment
Adjustment
Adjustment
to close the
8
to close
8
to close
8
to close the
8