Pvc Valve Console - Item No 469 - Cebora PLASMA PROF 180 HQC Manual De Instrucciones

2.9

PVC valve console - Item no 469

The PVC valve console is a device designed to manage the exchange of gases in ignition-transfer transitions and when
powering off.
It contains solenoids, check valves and pressure regulators.
TECHNICAL SPECIFICATIONS
GASES
CONCENTRATION
USED
Clean, dry and oil free in compliance with ISO 8573-1:
Air
2010 standard. Class 1.4.2 (particulate-water-oil)
Argon 99.997%
Nitrogen 99.997%
Oxygen 99.95%
Mixture:
H35
35% hydrogen, 65% argon
Mixture:
F5
5% hydrogen, 95% nitrogen
*
the ISO 8573-1: 2010 standard specifies the following for Class 1.4.2:
• Particulate: ≤ 20,000 solid particles per m3 of air with sizes between 0.1 and 0.5 µm;
≤ 400 solid particles per m3 of air with sizes between 0.5 and 1.0 µm;
≤ 10 solid particles per m3 of air with sizes between 1.0 and 5.0 µm.
• Water: the dew point in air pressure must be less than or equal to 3°C.
• Oil: the total oil concentration must be less than or equal to 0.1 mg per m3 of air.
Duty cycle
Degree of housing protection
Net weight
82/128
MAX. INLET PRESSURE
*
100%
IP 21S
3.2 kg
250
240
Fig. 2.5
0.8 MPa (8 bar)
0.8 MPa (8 bar)
0.8 MPa (8 bar)
0.8 MPa (8 bar)
0.8 MPa (8 bar)
0.8 MPa (8 bar)
FLOW RATE
220 l/min
70 l/min
150 l/min
90 l/min
130 l/min
30 l/min