Torch Cp455G - Item No 1639, 1640, 1642 - Cebora PLASMA PROF 180 HQC Manual De Instrucciones

2.13 Torch CP455G - Item No 1639, 1640, 1642

Torch CP455G is a multigas torch cooled using coolant. It is designed for bevel cutting. It is designed to use the
following gases:
- plasma: air, argon Ar, nitrogen N2, oxygen O2, H35 mixture (35% hydrogen H2 – 65% argon Ar) and F5 mixture (5%
hydrogen H2 – 95% nitrogen N2);
- secondaries: air, argon Ar, nitrogen N2, oxygen O2, water H2O;
- auxiliaries: air and nitrogen N2.
Torch CP455G is available in various versions, based on the application: on pantograph or on robotised systems. The
net weight of the torch with cable ranges from 8 kg to 12 kg for the different lengths.
TECHNICAL SPECIFICATIONS
Maximum cutting current I2
Duty cycle
Arc strike voltage
Max inlet pressure
Plasma gas
Secondary gases/liquids
Auxiliary gases
Net weight
86/128
300 A
100% @ 300 A
< 14 kV
0.8 MPa (8 bar)
Air, Argon, Nitrogen,
Oxygen, H35, F5
Air, Argon, Nitrogen,
Oxygen, Water
Air, Nitrogen
8-12 kg according
to the length
Robotized
applications
Fig. 2.9
Pantograph
applications